Removal of uranium (VI) from nuclear effluents onto aluminophosphate and silicoaluminophosphate molecular sieves

Aluminophosphate and silicoaluminophosphate molecular sieves with both five (AFI) and eleven (AEL) type structures are synthesized by hydrothermal crystallization at 473 K, using tripropylamine and dipropylamine as a structure-directing template. The as-prepared AFI and AEL sieves are characterized and then assessed as sorbents for uranium (VI) from radioactive effluents. The sorption process is used to reduce the volumes of effluents and convert them into a stable solid waste. The batch experimental studies are carried out to evaluate the AEL and AFI structure effect on the removal of uranium. The AlPO₄-5, SAPO-5, AlPO₄-11 and SAPO-11 are applied to radioactive effluents with different activities obtained from Nuclear Research Center of Draria, Algeria. Important decontamination factor values are obtained for AFI sorbents. Thermodynamic parameters, namely, the enthalpy (ΔH), entropy (ΔS) and free energy (ΔG) for each sorption process are calculated. The collected results indicated that sorbents are effective materials for the removal of uranium (VI) ions, the sorbent with AFI structure being a highly effective material for the removal of uranium (VI) ions from nuclear effluents.     

Study of blood collection and sample preparation for analysis of vitamin D and its metabolites by liquid chromatography–tandem mass spectrometry

The analysis of vitamin D status, with special emphasis on 25-hydroxyvitamin D and 1,25-dihydroxyvitamin D, is gaining interest in clinical studies due to the classical and non-classical effects attributed to this prohormone. In this research, the influence of the two steps preceding determination (viz. sample collection and preparation) on the quantitative analysis of vitamin D and its more important metabolites has been studied. Two preparation approaches, deproteination and solid-phase extraction (SPE), have been evaluated in terms of sensitivity to delimit their application, thus establishing that detection of 1,25-dihydroxyvitamin D cannot be addressed by protein precipitation. Concerning sample collection, serum and plasma reported high accuracy (above 83.3%) for vitamin D and metabolites, while precision, expressed as relative standard deviation, was below 12.9% for all analytes in both samples. Statistical analysis revealed that serum and plasma provided similar physiological levels for vitamin D₃, 24,25-dihydroxyvitamin D₃ and 25-hydroxyvitamin D₃, while significantly different levels were obtained for 1,25-dihydroxyvitamin D₃, always higher in plasma than in serum. Sample collection and treatment have proved to be significant in the analysis of vitamin D and its relevant metabolites.     

Introduction of a biowaste/graphene oxide nanocomposite as a coating for a metal alloy based SPME fiber: Application to screening of polycyclic aromatic hydrocarbons

The present study introduces a high efficiency metal alloy-based solid-phase microextraction (SPME) fiber coated with a green biowaste nanocomposite of chicken feet yellow membrane mixed with graphene oxide (CFYM/GO). An Al/Cr commercial heating element (aluchrom, AC) has been selected as the fiber substrate and designed as coiled form (CAC-SPME) to enhance its extraction and pre-concentration capacity. The fabricated fiber, CAC-SPME/CFYM/GO, has been employed for the extraction and pre-concentration of some commonly seen PAHs in different standard/real samples prior to their high performance liquid chromatography- ultraviolet (HPLC-UV) analyzing. The synthesized materials and the fibers surface were characterized by field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy analysis and Brunauer-Emmett-Teller surface area analysis. Under the optimized experimental conditions, low detection limits (LOD, 0.039–0.30 µg L^–1), wide linear ranges (LR, 0.13–643 µg L^–1) and good relative recoveries (RR, 76.20–105.60%) were achieved for all the target analytes. The materials applied to prepare this fiber were low-priced and accessible and also eliminated the need for expensive coating substances. In addition, using of the AC alloy substrate was increased the fiber physicochemical resistance and solved the breakage drawback of the conventional SPME fibers. Moreover, simple fabrication, high rigidity, long service life and high extraction capacity were some of the other advantages of the suggested fiber. Therefore, the proposed method can be utilized successfully for the routine analysis of PAHs in different matrixes.     

石墨相氮化碳材料在样品前处理中的研究进展

作为一种新型非金属材料,石墨相氮化碳以其独特的优点,如简单的制备方法、优良的化学及热稳定性、良好的生物兼容性和无毒性等,受到越来越多的关注。石墨相氮化碳及其复合材料目前已被广泛应用于电催化、光催化、生物成像等领域。由于具有大的比表面积,同时又是富电子的疏水材料,石墨相氮化碳相关材料被认为是一种理想的样品前处理吸附剂。该文探讨了近年来石墨相氮化碳及其复合材料作为固相萃取、分散固相萃取、磁性固相萃取、固相微萃取吸附剂在样品前处理中的应用,并对未来的发展趋势和应用前景进行了展望,以期为相关领域的研究提供帮助。     

Graphene oxide reinforced polyamide nanocomposite coated on paper as a novel layered sorbent for microextraction by packed sorbent

ABSTRACT

In this work, a novel layered sorbent for microextraction by packed sorbent (MEPS) was introduced, which has been prepared by coating graphene oxide/polyamide (GO/PA) nanocomposite (NC) onto cellulose paper through solvent exchange method. Scanning electron microscopy (SEM) was applied to investigate the surface characteristic and morphology of PA and GO/PA NC coated on cellulose paper. The prepared MEPS device was used for extraction of organophosphorous pesticides (OPPs) including chlorpyrifos, fenthion, fenithrothion, ethion, edifenphos and phosalone in environmental aqueous samples followed by detection using gas chromatography-flame ionisation detector (GC-FID). Important parameters affecting the MEPS method including pH of sample solution, extraction draw-discard cycles, sorbent layers, desorption solvent volume and desorption draw-eject number were studied and optimised using central composite design (CCD). Based on the method validation, limits of detection (LODs) were in the range of 0.2–1 µg L^?1. The calibration graphs for chlorpyrifos, fenthion and edifenphos are linear in the concentration range of 1 to 500 µg L^?1; for ethion and phosalone are linear in the range of 1–1000 µg L^?1 and for fenithrothion is linear in the range of 3–1000 µg L^?1. The method precision (RSD %) with six replicates determinations was in the range of 3 to 9.4 % and 3.9 to 11.9% for distilled water and spiked river water sample, respectively, at the concentration level of 300 µg L^?1 . The developed method was applied successfully to determine OPP compounds in river, dam and tap water samples; accordingly, the relative recoveries (RR%) were obtained in the range of 77.8 to 113.3%.     

Preparation and evaluation of an ion imprinted sol–gel material for selective solid-phase extraction of Ni(II)

An ion imprinted silica sorbent was prepared using a sol–gel process for selective extraction of Ni(II) ions from water samples. Bis(dibenzoylmethanto)nickel(II) complex was used as template; phenyltrimethoxysilane and 3-aminopropyltriethoxysilane as functional monomers and tetraethylorthosilicate as reticulating agent. The material was packed in solid-phase extraction (SPE) column. The effect of sampling volume, elution conditions, sample pH and sample flow rate on the extraction of Ni ions from water samples were studied. The relative selectivity coefficients of imprinted sorbent for Ni(II)/Co(II), Ni(II)/Cu(II) and Ni(II)/Cd(II) were 23.7, 30.3 and 24.4, times greater than non-imprinted sorbent, respectively. The relative standard deviation of the eight replicate determinations of Ni(II) was 4.2%. The detection limit was 0.9 µg L^?1 using flame atomic absorption spectrometry. The developed method was successfully applied to the determination of trace nickel in water samples.     

固体吸附管捕集冷原子吸收光谱法测定工作场所空气中汞的研究

建立了工作场所空气中汞及其化合物的高锰酸钾-二氧化锰混合固体吸附管捕集、冷原子吸收测定方法。用高锰酸钾与二氧化锰按质量比1∶1混合后填装玻璃管制成固体吸附管捕集工作场所空气中汞,并以0.90 mol·L-1的硫酸溶液解吸后冷原子吸收光谱法测定,与高锰酸钾-硫酸吸收液法的采样效率、样品稳定性、穿透容量进行了比对。在0.000 2~0.015 0 mg·L-1的浓度范围内线性关系良好,相关系数为0.999 1,空气中汞在0.001~2.820 mg·m-3范围内,平均采样效率为99.9%~100.0%,300 mg吸附剂对汞的穿透容量大于505.4 μg,吸附管对汞的平均加标回收率为96.4%~103.8%,日内、日间精密度分别为3.0%~3.3%,3.5%~5.2%,最低检出浓度为0.001 3 mg·m-3(以采集7.5 L空气样品计)、0.000 6(以96 L空气样品计)。采集后的吸附管在室温下保存30 d,下降率小于0.1%。固体吸附管采样方法简单,适用于工作场所空气中汞及其化合物的短时间、时间加权平均浓度及个体暴露浓度的采样检测。     

A polar macroporous sorbent for gas chromatography

Summary The gas chromatographic behaviour of crosslinked macroporous 2-hydroxyethyl methacrylate grafted with 2-methyloxazoline was investigated and the range of applicability of the copolymer was assessed. Retention index values were measured on this copolymer and compared with those obtained on the terpolymer 2-hydroxyethyl methacrylate-ethylene dimethacrylate-acrylonitrile. Rohrschneider constants and efficiency data for selected sorbates are given. The use of this type of polymer in the separation of various types of compounds is documented by various examples.     

无筛板型固相萃取柱的制备及其在食品中苯甲酸的测定研究

结合固相萃取(SPE)盘与含支撑物的SPE柱技术,制备了一种新型的无筛板型固相萃取柱.以C18填料为例,以话梅样品为介质对其中的苯甲酸进行分析,并用传统固相萃取小柱平行比较;将SPE与HPLC-UV结合,考察了填料对简单介质中苯甲酸的最大吸附量及洗脱曲线,研究了新型SPE柱在实际应用中的分离纯化效果.结果表明,新型SPE柱对样品的吸附效果更好,规格为200 mg/3 mL的SPE柱对苯甲酸的吸附量达到0.951 mg,超过了传统柱的吸附量0.908 mg;其洗脱曲线与传统柱几乎重合;苯甲酸在1～100 mg/L浓度范围内线性关系良好, r=0.9999,用此SPE柱纯化后的样品加标回收率和相对误差分别在88.4%～102.3%和1.4%～2.9%之间.